Brief introduction of rolling mortar wall :
Rolling mortar wall is an important part of cone crusher,which is made up of frame,moving cone,eccentric sleeve and so on.The main materials are generally high manganese steel,modified high manganese steel,new high manganese steel,and some are made of new materials.
configuration and characteristics:
The rolling mortar wall is connected by zinc alloy pouring and the solid condition should be checked after the cone crusher runs for a period of time.The connection between the rolling mortar wall and the adjusting ring is fixed by the U-type fixed screw,and the zinc alloy is cast in the middle of the rolling mortar wall and the adjusting ring so that it can be tightly bonded.
Replacement of rolling mortar wall:
The rolling mortar wall can be replaced on site.Screw down the adjusting screw sleeve mounted on the upper frame(notice the counter clockwise rotation)and dismantle the upper chamber hopper assembly,then lift adjustment nuts with hoisting equipment.After removing the bolt of the adjusting nut bracket,the wall can be removed and replaced.Clean the outer surface during assembly,adjust the screw thread surface butter,fix it in reverse order.
Suitable type: cone crusher